Door knob, solid Brass Laquered round 55 mm.

Comes with the fitting screw

Messing hoekje 50x50 mm. glans.

** Uitlopend modelletje ! ! OP = OP ! !

Kroon, iets gebogen. Handgestoken Linde hout.

Hollands model. 1320 x 500 > 500 mm.

Totale lengte is dan zo +/-  1.32 mtr. en het gestoken gedeelte in het midden zo'n

50 cm. hoog > 50 cm. breed.

** NU als speciale aanbieding .. in prijs verlaagd en gratis verzending !

Pull for drawer brass  Antique gepat. ( uniek model ! )

103x50 mm.

** matching esc, for drawer is 80460A

** matching esc. for door is 80470A

Furniture ornament, Pine 60x130 mm.

Porseleinen knop, Geribbeld model

Rond 31 mm. > 28 mm diep

Cleaning Cloth +/- 1,5 kg.

Div. Fabrics and sizes

Pallet akie ! OP = OP !

Borma wachs Chalkpaint - Shabby 375 ml. (600 gr. ) Olive green (31) 

Decorative Chalk Paint – Vintage effect Gypsum-Chalk based paint, suitable both for walls and wooden surfaces.

Thanks to its high solid content, it allows an excellent coverage, keeping a very good spreadability,

and making the surfaces homogeneous with a small number of applications.

When sanded, gives the possibility to reach very smooth finishings.

Borma wachs Chalkpaint - Shabby 375 ml. (600 gr. ) Extra dark blue (148)

Decorative Chalk Paint – Vintage effect Gypsum-Chalk based paint, suitable both for walls and wooden surfaces.

Thanks to its high solid content, it allows an excellent coverage, keeping a very good spreadability,

and making the surfaces homogeneous with a small number of applications.

When sanded, gives the possibility to reach very smooth finishings.

Teak OIL, 500 ml. - Borma Wachs

Color ; Teak (17) See the pic. att. for a color indication !

Borma TEAK OIL is a special blend of oils, ready to use, almost colorless, perfect for the outdoor and indoor protection of raw wood.

It donates a water-resistant veil to the treated surface, with a pleasant natural and not-greasy effect.

Thanks to its special formulation, enriched with appropriate UV filters and additives against weathering and harmful agents, it penetrates deeply,

ennobling the tonality and the natural beauty of the treated surface. As all the oils it undergoes wear, and so it periodically needs to be restored

with extremely ease to perform maintenance cycles. If the support is extremely worn, it is suitable to verify if it needs sanding before the treatment,

in order to obtain an increased elasticity.

How to use

• 

  Ready for use, for all types of raw wood, can be applied by spray, brush or roll.

• 

  On a clean and dust-free surface, apply at least two coats at intervals of at least 4/6 hours, to allow the precedent coat to dry.

• 

  Drying time: 8/12 hours at 20°C.
  Complete drying after 24 hours.

• 

  Yield: 8 - 12 m²/LT, depending on kind of wood.
  The treated supports can be overpainted.
  Close well the lid after use.
  Shake well before use.
  Contains: aromatic hydrocarbons.

 High quality Decorwax - Finish wax - Borma  500 ml. Clear 

100% nature ingrediënts are used for this fine wax, based on Carnauba

No color.

Also great for the greyish finish on top of the Borma chalkpaint !

30 min. water repellent

750 ml. color ; ( 50 white ) 

Dekorwax Lasur ( in-outdoor ) High solid non-peeling - closing finish, based on natural waxes and resins.

It provides a thick and smooth layer, preventing wood oxidation and wear.

Full pigmented, it’s formulated with high quality raw materials increasing UV rays resistance and preventing from moulds and insects’ attacks.

Ideal for brush application, it avoids any dripping.

Usage ; 8 - 12 m2 for 1 lit. ( depending on condition & kind of wood ) ( see for more specs. the .pdf on the right side from this page )

Houtwax lasur  - Borma Wachs

color ; Walnut med. (59)

750 ml.

Finishing product containing natural waxes and resins, with high protection UV filters. For indoor and outdoor use.
 

The high-quality substances and UV filters in the product prevent the formation of dye rot and attacks by insects such as woodworm and certain beetles, while guaranteeing optimal resistance to weather conditions. For interior and exterior use, light resistant colours, its natural density facilitates brush application.

Natural wax and resin based non-peeling, two - three coats, impregnant finish. The product penetrates deep into the wood enhancing the grain and

providing a soft, polished finish. The high-quality substances and UV filters in the product prevent the formation of dye rot and attacks by

insects such as woodworm and certain beetles, while guaranteeing optimal resistance to weather conditions.

Its formulation and natural density facilitates brush application.

How to use

• 

   

  For a more perfect finish, after applying with the brush we advise rubbing over with a cloth.

• 

   

   

  If needed, sand over before applying a second coat.

• 

  Clean the surface before use the products. Aplly with a brush directly onto the surface to be treated.

   

  Leave to act 8 hours before apply the second layer.

   

  Maximun drying after 24 h.

Voor verwerkings demonstratie, zie onderstaande video ;